Sennheiser Boom Mic Mkh 416

Availablity: In stock

AED 250 / Day


What's Included

The MKH 416 transformerless, RF condenser is designed as a combination of pressure gradient and interference tube microphones. Very good feedback rejection, low proximity effect, 130 dB/SPL. Rugged and resistant to changing climate conditions. Ideal for boom, fishpole, and camera mounting.

Its excellent directivity and compact design, high consonant articulation and feedback rejection make the MKH 416 a superb all-around microphone for film, radio and television, especially for outside broadcast applications.

Interference Tube Principle

·      Pressure gradient receiver with short interference tube

·      Employs RF-technology to control residual microphone noise. Optimizing the transducer's acoustic impedance results in a further improvement in low noise performance.

·      The RF-design yields exceptionally low noise levels and is virtually immune to humidity and moisture.

·      The comparatively low RF-voltage across the elements of the transducer also eliminates arcing and DC-bias creeping currents.

·      Hypercardioid at low and medium frequency, above 2kHz approaches lobar pattern

·      Very low inherent self-noise

·      High sensitivity

·      Transformerless and fully floating balanced output

·      Rugged, suitable for adverse climatic conditions

·      Matt black all-metal body

·      Increased directivity

·      Optimum S/N ratio

·      Lower gain on input channels required

·      Lowest noise and greatest signal stability

·      Highly immune to humidity in all conditions. Extremely stable.

·      Visually "low key"

Technical Specifications

Transducer

Pressure Gradient/Interference Receiver Condenser

Polar Pattern

Supercardioid/Lobar

Frequency Response

40 Hz - 20 KHz

Dynamic Range (Typical)

117 dB

Signal-to-Noise Ratio

81 dB

Maximum Input Sound Level

130 dB, (@ 1 KHz) 
Sensitivity 25 mV/Pa +/- 1dB

Power Requirements

Phantom Power 48v, (± 12v)

Output Impedance

Nominal Impedance: 25 Ohms
Minimum Terminating Impedance: 800 Ohms

Output Connectors

XLR-3M Type

Pad

None

Low Frequency Roll-Off

None

Applications

Film, Radio and Television, Especially for Outside Broadcast Applications.

Dimensions

9.84 x 0.74 (250 x 19mm) LxDiameter

Weight

5.82 oz. (175 g)